5-axis CNC milling
Simultaneous five-axis machining for impellers, housings and structural components.
- Up to 800 × 650 × 500 mm
- Titanium, Inconel, stainless
- Lights-out cells
AS9100D · ISO 9001:2015 · Est. 1998
Precision parts. Delivered to print, on schedule.
Five-axis machining, Swiss turning and controlled assembly for programs where ±0.005 mm is the requirement, not the aspiration.
- ±0.005 mm
- Routine tolerance capability
- 99.6%
- On-time delivery, trailing 12 months
- 48
- CNC machines across 6,500 m²
- 24 h
- Typical RFQ response
Complex geometry, hard materials, repeatable results.
Integrated machining, finishing and inspection under one roof — so your parts move from bar stock to certified assembly without hand-offs.
Swiss & multi-axis turning
Sliding-headstock turning for small, slender and high-volume precision parts.
- Ø 1–32 mm bar capacity
- Live tooling & sub-spindle
- Bar-fed, 24/5 production
Precision grinding
Cylindrical and surface grinding for critical fits and fine finishes.
- Ra 0.2 µm achievable
- Roundness to 0.001 mm
- Hardened steels
Assembly & kitting
Clean, controlled sub-assembly with full traceability and test.
- ISO Class 8 clean area
- Torque & leak testing
- Serialised build records
Finishing
Managed anodising, passivation and coatings through an approved supplier network.
- Type II / III anodise
- Passivation to spec
- Laser marking in-house
Engineering support
DFM reviews that cut cost and lead time before the first chip is made.
- DFM within 48 h
- Fixture & tooling design
- First-article planning
Trusted where failure isn't an option.
Aerospace & defence
Flight-critical brackets, actuator components and structural fittings.
Medical devices
Surgical instrument components and implant-grade machining.
Energy
Valve bodies, manifolds and downhole tooling in exotic alloys.
Semiconductor
High-purity components for wafer handling and vacuum systems.
Robotics & automation
Precision gear housings, end-effectors and motion components.
Industrial equipment
Production runs of hydraulic and pneumatic components.
From drawing to delivery, with nothing left to chance.
- 01
Quote & DFM
Detailed quote within 24 hours, with manufacturability feedback included.
- 02
Plan
Process routing, fixturing and inspection plan agreed before release.
- 03
Machine
Production on monitored cells with in-process probing and SPC.
- 04
Inspect
CMM verification, first-article reports and full material traceability.
- 05
Deliver
Protective packaging, certs of conformance and on-time dispatch.
Measured, documented, certified.
Our quality system is built for regulated industries. Every part ships with the evidence your auditors expect.
- < 150 ppm
- Customer reject rate
- 100%
- Material traceability
- 4
- Climate-controlled CMMs
AS9100D
Aerospace quality management (illustrative — fictional company)
ISO 9001:2015
Quality management system (illustrative — fictional company)
ISO 13485
Medical device manufacturing (illustrative — fictional company)
A modern, well-maintained machine park.
CategoryCapacityDetail
5-axis machining12 machinesSimultaneous 5-axis machining centres with pallet automation.
Swiss turning14 machinesSliding-headstock lathes with bar feeders and live tooling.
3-axis & HMC16 machinesVertical and horizontal machining centres for prismatic work.
Grinding6 machinesCNC cylindrical and surface grinders.
Metrology4 CMMs + opticalBridge CMMs, optical comparators and surface profilometry.
Programs we've helped launch.
-38%Cycle time
AerospaceTier-1 aerospace supplier (illustrative)
- Challenge
- A titanium actuator housing was failing first-article at the incumbent supplier.
- Outcome
- Re-planned fixturing and probing strategy delivered approved FAI in five weeks.
40×Volume scaled
MedicalSurgical device OEM (illustrative)
- Challenge
- Rapid scale-up of a stainless instrument component from 500 to 20,000 units a year.
- Outcome
- Moved to bar-fed Swiss production with automated in-process gauging.
-52%Lead time
EnergyEnergy equipment maker (illustrative)
- Challenge
- Long lead times on Inconel valve bodies were delaying field deployments.
- Outcome
- Dedicated 5-axis cell and pre-booked material cut lead time in half.
About Velora
Since 1998
Velora Precision Works began in 1998 as a four-machine job shop serving local industrial customers. Today we are a 140-person precision manufacturing partner to aerospace, medical and energy programs — still privately held, and still run by engineers.
We invest continuously in automation and metrology so our customers get the
same part, to the same standard, every time. When you work with Velora, you
work directly with the engineers and machinists who make your parts. /CMS TEST
“Velora's DFM feedback took cost out of the part before we'd even placed the order. Their FAI packages are the cleanest we receive.”
“They treat our tolerances as a commitment. Two years, zero escapes.”
Send us your drawings. We'll respond within one business day.
Share your part details and we'll return pricing, lead time and manufacturability notes.
- +1 (555) 010-0142
- rfq@velora.example
- 1200 Example Industrial Parkway, Unit 7, Fictional City, EX 00000
- Mon–Fri, 7:00–17:30